BMMSM - WWS-24 WOODSMAN SOLID COLOR OIL STAIN

Product Identification

Product ID:WWS-24 WOODSMAN SOLID COLOR OIL STAIN
MSDS Date:07/25/1990
FSC:8010
NIIN:00F021846
MSDS Number: BMMSM

Responsible Party
TRU-TEST MANUFACTURING COMPANY
201 JANDUS ROAD
CARY, IL 60013

Emergency Phone: 1-800-228-5635

Info Phone: 1-800-639-5383

Cage: TRUTE

Contractor
TRU-TEST MANUFACTURING CO
CARY, IL 60013 US

Telephone: 708-639-5383

Cage: TRUTE

Ingredients

2-BUTOXYETHANOL (ETHYLENEGLYCOL MONOBUTYL ETHER), BUTYL

CAS: 111-76-2

RTECS: KJ8575000

Fraction By Weight: 10%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293


<350 GM/L

RTECS: 9999999VO

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES/SKIN: IRRITATION. INHALATION:
NOSE, THROAT, MUCOUS MEMBRANS OF THE RESPIRATORY TRACT IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:EYES/SKIN: IRRITATION. INHALATION: NOSE,
THROAT, MUCOUS MEMBRANS OF THE RESPIRATORY TRACT IRRITATION.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. SKIN: REMOVE W/SOAP & WATER.
EYES: FLUSH IMMEDIATELY W/PLENTY OF WATER. INGESTION: GIVE 1 OR 2
GLASSES OF WATER TO DILUTE. DON'T INDUCE VOMITING. OBTAIN MEDICAL
ATTENT ION IN ALL CASES.

Fire Fighting

Flash Point:<200F
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, OR WATER FOG.
Fire Fighting Procedures:USE WATER TO COOL CLOSED CONTAINERS TO PREVENT
PRESSURE BUILD-UP & EXPLOSION WHEN EXPOSED TO EXTREME HEAT.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Accidental Release

Spill Release Procedures:DIKE & CONTAIN SPILL W/INERT MATERIAL SUCH AS
SAND, EARTH, ETC. TRANSFER THE LIQUID TO CONTAINERS FOR RECOVERY OR
DISPOSAL.

Handling

Handling and Storage Precautions:KEEP FROM FREEZING. DON'T TAKE
INTERNALLY.
Other Precautions:AVOID CONTACT W/SKIN.

Exposure Controls

Respiratory Protection:NONE REQUIRED IF GOOD VENTILATION IS MAINTAINED
WHEN BRUSING OR ROLLING. DURING SPRAY APPLICATION, USE AN APPROVED
MECHANICAL FILTER RESPIRATOR TO REMOVE AIRBORNE PARTICLES OF
OVERSPRAY.
Ventilation:SUFFICIENT TO KEEP AIR CONTAMINANTS Protective Gloves:AS REQUIRED
Eye Protection:SAFETY GLASSES & SPLASH GUARDS
Other Protective Equipment:EYEWASH FACILITY, PROTECTIVE CLOTHING
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING, SMOKING OR USING WASHROOM.
Supplemental Safety and Health

Chemical Properties

Boiling Pt:B.P. Text:212F
Vapor Density:>AIR
Evaporation Rate & Reference:SLOWER THAN ETHER

Stability

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT & FREEZING

Disposal

Waste Disposal Methods:LIQUID MATERIAL & CONTAMINATED DIKING MATERIAL
SHOULD BE LANDFILLED ACCORDING TO CURRENT LOCAL, STATE & FEDERAL
REGULATIONS. KEEP SPILL OUT OF SEWERS & OPEN BODIES OF WATER.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.